infinite Prime Hybrid Control System
infinite Prime with Hybrid Connections
The innovative infinite Prime with Hybrid Connections can be programmed on-site by connecting an LCD keypad or off-site via a PC using the up/downloading software (Remote Programmer).
The solution utilizes GSM communications for end-user event reporting and central station communications (with PSTN as backup). PSTN communications can also be used as primary mode if required. SMS event notifications provide an innovative method for both central station and user monitoring. Additionally, users can send SMS commands to the system enabling complete remote system operations, anywhere, anytime.
Control System Features
- Fujitsu's 16-bit CPU core@16Mhz
- ITRON based built-in operating system
- Up to 32 wireless or hardwire (depending on hardware configuration)
- 32 user codes
- Arming Methods: Full, Part or Perimeter
- 256 events log, time and date stamped
- Serial port for on site laptop programming and firmware updates
- Programmable relay outputs contact rating: 100mA (max. load)
- Built-in siren (in wireless configuration): 105dB or 85dB
- Operating temperature: 0-60°C
- Tamper Switch: N.C.
- Dimensions: 30.5 x 30.5 x 10.2cm
Advanced Communication Features
- Internal GSM/PSTN/X-10 communication modules
- Communication Interface Options: PSTN or GSM (optional expansion module required)
- Two-way audio communication – full duplex/simplex
- GSM, PSTN as primary or backup communication mode
- SMS alerts to end-users
- SMS-SIA (textual) via GSM/SMS for fast and reliable event reporting
- SIA and Contact ID via PSTN/Voice over GSM
- GSM Siemens MC-55 tri-band engine (900/1800/1900 MHz) with GPRS Class 10 support, utilizing voice channel, SMS and data over a 9600 baud rate modem
- PSTN high-speed Silicon Labs modem chipset, 2400 baud rate
- Central Station Event Reporting Accounts: 3 (8-digit account number)
- Vocal Message Accounts: 3
- Telephone Nos.: 3 regular, 3 Vocal Message, RP Callback and Service Call (16-digits)
Home Automation
- Control Medium: Power-line carrier
- Protocol: X10
- HA Units: 16 individually addressed
Wireless Transceiver
- Type: Super-heterodyne, fixed frequency
- Frequency: 868.35, 433.92 or 418MHz FM
- Data Encryption: SecuriCode™
Robust, Encrypted FM Technology
- FM technology for optimal RF noise immunity
- Infineon™ receiver, super-heterodyne, fixed frequency
- Digital RSSI (Reception Signal Strength Indication)
- 66 bits encryption with SecuriCode™ technology (hopping and rolling code)
- Robust anti-collision
- Low power system: very low power consumption for transmitters; requires only 6µA in standby mode
- High-quality 3.6V/1.2Ah lithium batteries (2x-screening process)
- Two-stage transmitter for improved frequency stability
- PLL synthesizer method
- Frequency options: 868, 433, 418, 315MHz
Electrical Specifications
- Power Input: 230VAC, 50Hz (24VA transformer)
- Backup Battery: 12V/7Ah
- Power Output: 14VDC (AC operated) or 10.5-13VDC (battery operated),
- 500mA (max.) including power to main board, LCD keypads, peripheral modules and detection devices for min. 8 hours standby.
- Siren Output: Regulated 14VDC (nominal) at 600mA (max.)
- Current Consumption (standby):
• Main Board – 60mA
• Transceiver Module – 10mA
• Voice Module – 10mA
• PSTN Module – 40mA
• GSM Module – 50mA
• Home Automation Module – 15mA
• Internal Zone Expander – 15mA
• Hardwire LCD Keypad – 10mA (60mA with backlight on)
• Interphone – 0mA (100mA during operation)
- Fuse Ratings:
• 1.6A/250V (T) – Main board DC protection fuse
• 0.25A/250V (T) – Power Supply module AC protection fuse
- PGM Relay Output: Solid state relay, 14V/100mA max. load
Encrypted Devices
- Wireless detection devices: Up to 32 (depending on hardware configuration)
- Up to 19 controlled and non-controlled wireless keyfobs
- Up to 16 controlled and non-controlled smartkeys
- Medical emergency button
- Wireless Keypads: 4
- Repeaters: 4
- Wireless Siren: 1 (1-way or 2-way)
Unique Installer Tools
- Menu driven programming for quick and easy installation
- Modular, plug & play system configuration for quick and easy expansion
- Simple and fast wireless device registration
- Advanced remote programming software
• Fast up/downloading via PSTN or GSM
• Delete keyfobs remotely
• Upload status of all wireless devices
- 3 customizable default programs for presenting all system parameters, minimizing on-site system configuration
- Installer built-in utilities
• Real-time transmitter list and status, visible and audible signal strength meter
• GSM strength meter
• Smart walk test; Transmitter test; Wireless siren test; Internal siren test; Interface test
- Range extender repeater for expansive installations
Related Products
Related Documents
|
